This consultation was open from:
August 12, 2026
to September 26, 2026
Decision summary
We have granted approval to D.Crupi & Sons Limited, located in Toronto, Ontario, to be registered under the Technical Standards Registry – Air Pollution. This facility will adhere to all technical and operational requirements in the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
Location details
Site address
176 Bethridge Road
Toronto,
ON
M9W1N3
Canada
Site location details
Industrial/Commercial
Site location map
The location pin reflects the approximate area where environmental activity is taking place.
View this location on a map opens link in a new windowProponent(s)
D.Crupi & Sons Limited
85 Passmore Avenue
Toronto,
ON
M1V4S9
Canada
Decision details
We have granted approval to D.Crupi & Sons Limited to be registered in the Technical Standards Registry – Air Pollution (Technical Standards Registry) in respect of the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
D. Crupi & Sons Limited is an asphalt mix plant that produces paving asphalt and is located at 176 Bethridge Road, in Toronto, Ontario. The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. D. Crupi & Sons Limited is registered with respect to benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides. A full list of contaminants is provided in the link below titled "Registration Approval".
Registration to a technical standard
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standards for the registered contaminants for the facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix – Industry Standard.
Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
5775 Yonge Street
Floor 9
Toronto,
ON
M2M 4J1
Canada
How to Appeal
Appeals are not allowed
Connect with us
Contact
Jeff Burdon
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
Original proposal
Proposal details
This proposal is for D. Crupi & Sons Limited to be registered in the Technical Standards Registry – Air Pollution (Technical Standards Registry) in respect of the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
D. Crupi & Sons Limited is an asphalt mix plant that produces paving asphalt and is located at 176 Bethridge Road, in Toronto, Ontario. The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. D. Crupi & Sons Limited is applying to register with respect to benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides; full list of requested contaminants is available for viewing.
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for benzo(a)pyrene, metals, combustion gases, sulphur dioxide and nitrogen oxides for the facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix – Industry Standard. Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
5775 Yonge Street
Floor 9
Toronto,
ON
M2M 4J1
Canada
Comment
Commenting is now closed.
This consultation was open from August 12, 2026
to September 26, 2026
Connect with us
Contact
Jeff Burdon
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
Comments received
Through the registry
0By email
0By mail
0