This consultation was open from:
June 12, 2025
to July 27, 2025
Decision summary
We have granted approval to Mill-AM Corporation, located in Windsor, Ontario, to be registered under the Technical Standards Registry - Air Pollution.
This facility is required to adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard under the Local Air Quality Regulation.
Location details
Site address
5151 Rhodes Drive
Windsor,
ON
N8N 2M1
Canada
Proponent(s)
Mill-AM Corporation
2199 Blackacre Drive
Old Castle,
ON
N0R 1L0
Canada
Decision details
We have granted approval to Mill-AM Corporation to be registered in the Technical Standards Registry - Air Pollution (technical standards registry) in respect of the Asphalt Mix - Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
Mill-AM Corporation is an asphalt mix plant that produces paving asphalt and is located at 5151 Rhodes Drive, in Windsor, Ontario.
The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. Mill-AM Corporation is applying to register with respect to benzo(a)pyrene.
Registration to a technical standard
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for benzo(a)pyrene for the facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix - Industry Standard.
Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix - Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
4510 Rhodes Drive
Unit 620
Windsor,
ON
N8W 5K5
Canada
How to Appeal
Appeals are not allowed
Connect with us
Contact
Jeff Burdon
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
Original proposal
Proposal details
This proposal is for Mill-AM Corporation to be registered in the technical standards registry – Air Pollution (technical standards registry) in respect of the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
Mill-AM Corporation is an asphalt mix plant that produces paving asphalt and is located at 5151 Rhodes Drive, in Windsor, Ontario. The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. Mill-AM Corporation is applying to register with respect to benzo(a)pyrene.
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for benzo(a)pyrene for the facility.
Registration to the technical standards registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix – Industry Standard. Registration to the technical standards registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The technical standards registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
4510 Rhodes Drive
Unit 620
Windsor,
ON
N8W 5K5
Canada
Comment
Commenting is now closed.
This consultation was open from June 12, 2025
to July 27, 2025
Connect with us
Contact
Nick Fragiadakis
40 St. Clair Avenue West
9th Floor
Toronto,
ON
M4V 1M2
Canada
Comments received
Through the registry
0By email
0By mail
0