This consultation was open from:
March 25, 2020
to May 9, 2020
Decision summary
We have granted approval to Northern Plating (Sudbury) Inc., located in Lively, Ontario, to be registered under the Technical Standards Registry – Air Pollution. This facility will adhere to all technical and operational requirements in the Metal Finishers – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).
Location details
Site address
109 Magill Street
Lively,
ON
P3Y 1K6
Canada
Site location map
The location pin reflects the approximate area where environmental activity is taking place.
View this location on a map opens link in a new windowProponent(s)
Northern Plating (Sudbury) Inc.
109 Magill Street
Lively,
ON
P3Y 1K6
Canada
Decision details
An approval has been granted for Northern Plating (Sudbury) Inc., to be registered to the Technical Standards Registry – Air Pollution (Technical Standards Registry) in respect of the Metal Finishers – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05). Northern Plating (Sudbury) Inc. is registered with respect to chromium compounds (hexavalent).
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Metal Finishers - Industry Standard for chromium compounds (hexavalent).
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for chromium compounds (hexavalent) for the facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Metal Finishers – Industry Standard. Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Metal Finishers – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
135 St Clair Ave West
1st Floor
Toronto,
ON
M4V 1P5
Canada
199 Larch Street
Suite 1201
Sudbury,
ON
P3E 5P9
Canada
How to Appeal
Appeals are not allowed
Connect with us
Contact
Brian Ramasir
1st Flr, 135 St Clair Ave W
Toronto,
ON
M4V 1P5
Canada
Original proposal
Proposal details
This proposal is to register Northern Plating (Sudbury) Inc., under the Technical Standards Registry – Air Pollution (Technical Standards Registry) with regards to the Metal Finishers – Industry Standard. Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation (O. Reg. 419/05).
Northern Plating (Sudbury) Inc., is a metal parts finishing facility that undertakes hard chromium electroplating of new and reconditioned machinery parts for the mining, forestry and refining industries and is located at 109 Magill Street, Lively, Ontario. The facility is part of a class identified by the primary North American Industry Classification System code 332810, Coating, Engraving, Heat Treating and Allied Activities.
Northern Plating (Sudbury) Inc., has applied to register for chromium compounds (hexavalent). Registration is for all metal finishing sources at the facility that emit chromium compounds (hexavalent).
Registration to a technical standard
Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Metal Finishers - Industry Standard for the contaminants they are registered for.
Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements would replace the air standards for the contaminants that are registered for this facility.
Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Metal Finishers – Industry Standard.
Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of Ontario's Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under a Metal Finishers – Industry Standard is still required to have approval under Part II.1 of Ontario's Protection Act for that equipment.
The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks’ website and sets out the names of all facilities registered in the Registry.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
135 St Clair Ave West
1st Floor
Toronto,
ON
M4V 1P5
Canada
199 Larch Street
Suite 1201
Sudbury,
ON
P3E 5P9
Canada
Comment
Commenting is now closed.
This consultation was open from March 25, 2020
to May 9, 2020
Connect with us
Contact
Brian Ramasir
1st Flr, 135 St Clair Ave W
Toronto,
ON
M4V 1P5
Canada
Comments received
Through the registry
0By email
0By mail
0