Inventus Mining - Mineral exploration permit

Instrument type: Mineral exploration permit

ERO number
019-2110
Ministry reference number
PR-20-000137
Notice type
Instrument
Act
Mining Act, R.S.O. 1990
Posted by
Ministry of Energy, Northern Development and Mines
Transferred to
Ministry of Mines
Notice stage
Decision
Decision posted
Comment period
July 17, 2020 - August 16, 2020 (30 days) Closed
Last updated

This consultation was open from:
July 17, 2020
to August 16, 2020

Decision summary

The Director of Exploration has made a decision on the exploration permit application PR-20-000137 to Inventus Mining Corporation for early exploration activities near Sudbury, Ontario.

The decision is to: Issue.

Location details

Site location details

The mining activities are located approximately 37 kilometres northeast of Sudbury, Ontario, in the Township of Rathbun, Sudbury Division, South Region.

Claim numbers instructions: “To view individual claims on a map please use the Mining Lands Administration System. Click on “I want to…” and select “Find a claim” to search by claim numbers or “Find a township” to search by township.”

Claim numbers: 534119, 534136, 563201, 563203, 563206, 563207, 563208, 563209, 563210, 563211, 563212, 563214, 563215, 563216, 563217, 563221, 563222, 563223, 563224, 563225, 563330, 563346, 563347, 563348

Site location map

The location pin reflects the approximate area where environmental activity is taking place.

View this location on a map opens link in a new window

Proponent(s)

Inventus Mining
82 Richmond St. East
Floor 1
Toron, ON
M5C 1P1
Canada

Decision details

On August 19, 2020 the ministry issued an exploration permit near Elliot Lake, Ontario to undertake Mechanized Drilling, Mechanized Stripping, and Pitting and Trenching of Bedrock.

This permit will allow the company to:

  • mechanized Drilling (where the drill weight is greater than 150 kilograms)
  • mechanized Stripping (greater than 100 square metres in a 200 metres radius)
  • pitting and Trenching of Bedrock (greater than 3 cubic metres in a 200-metre radius)

Plan Activities:

  • geophysical Survey Requiring Generator Type
  • mechanized Stripping (less than 100 square metres in a 200 metres radius)
  • pitting and Trenching (greater than one cubic metre, less than 3 cubic metres in a 200-metre radius)
  • line Cutting (less than 1.5 metres width)

The exploration permit was issued once all Indigenous communities and the public had the opportunity to provide comment or raise their concerns. The issued exploration permit is valid for a period of three years from the date of issue.

Comments received

Through the registry

0

By email

0

By mail

0
View comments submitted through the registry

Effects of consultation

No comment was received through the Environmental Registry of Ontario resulting in no impact on the decision to proceed or not with this proposal.

Supporting materials

View materials in person

Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.

Get in touch with the office listed below to find out if materials are available.

Mineral Development Office (Sudbury)
Address

933 Ramsay Lake Road
Floor B6
Sudbury, ON
P3E 6B5
Canada

Office phone number

How to Appeal

Appeals are not allowed

This instrument type cannot be appealed. Learn more about our consultation process.

Connect with us

Contact

Sign up for notifications

We will send you email notifications with any updates related to this consultation. You can change your notification preferences anytime by visiting settings in your profile page.

Follow this notice

Original proposal

ERO number
019-2110
Ministry reference number
PR-20-000137
Notice type
Instrument
Act
Mining Act, R.S.O. 1990
Posted by
Ministry of Energy, Northern Development and Mines
Proposal posted

Comment period

July 17, 2020 - August 16, 2020 (30 days)

Proposal details

Inventus Mining Corporation has submitted an application to the ministry for an exploration permit as required under the Mining Act for prescribed early exploration activities.

The activities that this permit would allow Inventus Mining Corporation to carry out are as follows:

  • mechanized Drilling (where the drill weight is greater than 150 kilograms)
  • mechanized Stripping (greater than 100 square metres in a 200 metres radius)
  • pitting and Trenching of Bedrock (greater than 3 cubic metres in a 200-metre radius)

Plan Activities (if applicable)

  • geophysical Survey Requiring Generator Type
  • mechanized Stripping (less than 100 square metres in a 200 metres radius)
  • pitting and Trenching (greater than one cubic metre, less than 3 cubic metres in a 200-metre radius)
  • line Cutting (less than 1.5 metre width)

The potential disturbance from the activities are described as:

Mechanized Surface Stripping: uses heavy equipment to remove vegetation and soil (overburden) from bedrock. The potential environmental disturbance includes (but are not limited to): use of heavy equipment such as bulldozers, backhoes, excavators or forest harvest equipment, to remove soil from the bedrock, washing the bedrock by pumping water from nearby lakes, rivers or streams, and creation of access trails.

Pitting and Trenching: are conducted to gain a greater visual understanding of the rock. The potential environmental disturbance includes (but is not limited to): the removal of surface soil, exposed rock as well as excavation or blasting of rock leaving shallow holes or trenches that vary in depth and length from the use of heavy equipment.

Drilling: provides rock samples from below the surface. Testing the samples determines the properties of the soil and rocks, including mineral and metal content. Potential environmental disturbances include (but are not limited to): clearing surface terrain for “drill pads” (small areas cleared for drill rigs and/or helicopters), installing casings (hollow steel pipes called the collar), and pumping water from a sump, nearby lakes, rivers or streams.

Proponents are required to follow provincial standards for early exploration to minimize the impacts to public health, safety and the environment from early exploration activities described above. You can find the standards in the Activities Information Sheets or on the Ministry website under Mining Act Policies, Standards and Directives (see links in “Related links” section).

This notice is provided to receive comments that can be considered in the decision-making process prior to the issuance of an exploration permit.

An Exploration Permit does not relieve the proponent from compliance with any other requirements that are set out under the Mining Act or any other Act. All activities included in the Exploration Permit proposal must be carried out in compliance with Ontario Regulation 308/12 and the Provincial Standards for Early Exploration. The Exploration Permit duration will be up to 3 years with the possibility of one renewal for up to three years.

Supporting materials

View materials in person

Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.

Get in touch with the office listed below to find out if materials are available.

Mineral Development Office (Sudbury)
Address

933 Ramsay Lake Road
Floor B6
Sudbury, ON
P3E 6B5
Canada

Office phone number

Comment

Commenting is now closed.

This consultation was open from July 17, 2020
to August 16, 2020

Connect with us

Contact