GIP Construction and Materials Limited - Approval to register for a technical standard for air pollution (industry standard)

Instrument type: Approval to register for a technical standard for air pollution (industry standard)

ERO number
019-6083
Ministry reference number
6407-C3TE7N
Notice type
Instrument
Act
Environmental Protection Act, R.S.O. 1990
Posted by
Ministry of the Environment, Conservation and Parks
Notice stage
Proposal
Proposal posted
Comment period
March 23, 2023 - May 7, 2023 (45 days) Closed
Last updated

This consultation was open from:

March 23, 2023
to May 7, 2023

Proposal summary

This proposal is for AECON Construction and Materials Limited, located in Brampton, Ontario, to be registered under the Technical Standards Registry – Air Pollution. This facility will adhere to all technical and operational requirements in the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).

Location details

Site address

45 Van Kirk Drive
Brampton, ON
L7A 1A6
Canada

Site location map

The location pin reflects the approximate area where environmental activity is taking place.

View this location on a map opens link in a new window

Proponent(s)

GIP Construction and Materials Limited
20 Carlson Court
Toronto, ON
M9W 7K6
Canada

Proposal details

This proposal is to register AECON Construction and Materials Limited in the Technical Standards Registry – Air Pollution (Technical Standards Registry) in respect of the Asphalt Mix – Industry Standard under the Local Air Quality Regulation (O. Reg. 419/05).

AECON Construction and Materials Limited is an asphalt mix plant that produces paving asphalt and is located at 12 Canam Crescent, in Brampton, Ontario. The facility is part of a class identified the North American Industry Classification System (NAICS) code 324121, Asphalt Paving Mixture and Block Manufacturing. AECON Construction and Materials Limited is applying to register with respect to benzo(a)pyrene.

Registration to a technical standard

Registration to a technical standard means that this facility must adhere to all technical and operational requirements in the Asphalt Mix - Industry Standard for benzo(a)pyrene.

Technical standards ensure that facilities are managing impacts on an airshed by installing best available technology. These requirements replace the air standard for benzo(a)pyrene for the facility.

Registration to the Technical Standards Registry is a compliance approach under the Local Air Quality Regulation. It requires that the company demonstrate compliance on an ongoing basis through applicable technical standard requirements set out in the Asphalt Mix – Industry Standard. Registration to the Technical Standards Registry does not exempt the facility from the requirements under section 9 of the Ontario Environmental Protection Act, which regulates alterations to plant infrastructure and processes. Therefore, a company required to install equipment under the Asphalt Mix – Industry Standard is still required to have approval under Part II.1 of the Ontario Environmental Protection Act for that equipment.

The Technical Standards Registry is available on the Ministry of the Environment, Conservation and Parks website and sets out the names of all facilities registered in the Registry.

Supporting materials

View materials in person

Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.

Get in touch with the office listed below to find out if materials are available.

Halton-Peel District Office
Address

4145 North Service Road
Suite 300
Burlington, ON
L7L 6A3
Canada

Office phone number
Local Air Quality Permits
Address

40 St. Clair Avenue West
9th Floor
Toronto, ON
M4V 1M2
Canada

Office phone number

Comment

Commenting is now closed.

The comment period was from March 23, 2023
to May 7, 2023

Connect with us

Contact

Sign up for notifications

We will send you email notifications with any updates related to this consultation. You can change your notification preferences anytime by visiting settings in your profile page.

Follow this notice