This consultation was open from:
June 20, 2024
to July 20, 2024
Decision summary
The Director of Exploration has made a decision on the exploration permit application PR-24-000136 to URSA MAJOR MINERALS INCORPORATED for early exploration activities.
The decision is to issue the permit.
Location details
Site location details
The early exploration activities are located approximately 60 kilometres West of Sudbury, Ontario, in BALDWIN, PORTER areas and/or townships, District of SUDBURY, Southern Ontario Region.
Claim numbers instructions: To view individual claims on a map please use the Mining Lands Administration System. Click on “I want to…” and select “Find a claim” to search by claim numbers or “Find a township” to search by township.
Claim numbers: 107940, 109510, 128718, 128798, 139040, 159206, 191654, 191755, 192838, 209669, 218083, 228053, 228067, 228716, 239572, 247540, 247842, 248441, 256940, 288054, 296121, 304867, 311631, 315492, 315570, 315571, 326528, 327118, 344195, 556718, 556719, 556720, 556721, 556723, 556727, 779887, 779889
Proponent(s)
URSA MAJOR MINERALS INCORPORATED
45 OAK STREET
P.O. BOX 103
DOWLING,
ON
P0M 1R0
Canada
Decision details
On August 2, 2024, the ministry issued the proposed early exploration permit.
This permit will allow the company to conduct:
Permit activities:
- mechanized drilling (where the drill weight is greater than 150 kilograms)
Plan activities:
- geophysical survey requiring generator type
- mechanized drilling (where the drill weight is less than 150 kilograms)
- line cutting (less than 1.5 metres in width)
The exploration permit was issued once all Indigenous communities and the public had the opportunity to provide comment or raise their concerns. The Exploration Permit duration will be up to 3 years with the possibility of renewal.
Effects of consultation
No comments were received resulting in no impact on the decision to proceed or not with this proposal.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
933 Ramsay Lake Road
Floor B6
Sudbury,
ON
P3E 6B5
Canada
How to Appeal
Appeals are not allowed
This instrument type cannot be appealed. Learn more about our consultation process.
Connect with us
Contact
France Belley-Biswas
Willet Green Miller Ctr Level B6
933 Ramsey Lake Road
Sudbury,
ON
P3E 6B5
Canada
Original proposal
Proposal details
The proponent has submitted an application to the ministry for an exploration permit as required under the Mining Act for prescribed early exploration activities.
The activities that this permit would allow the proponent to carry out are as follows:
- mechanized drilling (where the drill weight is greater than 150 kilograms)
Plan activities:
- geophysical survey requiring generator type
- mechanized drilling (where the drill weight is less than 150 kilograms)
- line cutting (less than 1.5 metres in width)
The potential disturbance from the activities are described as:
Mechanized Drilling provides rock samples from below the surface. Testing the samples determines the properties of the soil and rocks, including mineral and metal content. Potential environmental disturbances include (but are not limited to): clearing surface terrain for “drill pads” (small areas cleared for drill rigs and/or helicopters), installing casings (hollow steel pipes called the collar), and pumping water from a sump, nearby lakes, rivers or streams.
Line Cutting (less than 1.5 metres in width) the activity consists of line-cutting, using hand tools only. Potential environmental disturbances include clearing out the underbrush. In line cutting where there is ground cover present, potential environmental disturbances include clearing the brush and vegetation. In light underbrush there is likely little or no brushing. This is a one-time exercise and unless the underbrush is continually cleared, it will typically regenerate within the same or next growing season.
Geophysical Survey Requiring Generator Type the activity consists of line-cutting, using hand tools only. Potential disturbances include clearing out underbrush to establish a grid in order to temporarily lay wire lines used to record geophysical measurements. In light underbrush there is likely little or no brushing. This is a one-time exercise and unless the underbrush is continually cleared, it will typically regenerate within the same or next growing season.
Proponents are required to follow provincial standards for early exploration to minimize the impacts to public health, safety and the environment from early exploration activities described above. You can find the standards in the Activities Information Sheets or on the Ministry website under Mining Act Policies, Standards and Directives (see links in “Related links” section).
This notice is provided to receive comments that can be considered in the decision-making process prior to the issuance of an exploration permit.
An Exploration Permit does not relieve the proponent from compliance with any other requirements that are set out under the Mining Act or any other Act. All activities included in the Exploration Permit proposal must be carried out in compliance with Ontario Regulation 308/12 and the Provincial Standards for Early Exploration. The Exploration Permit duration will be up to 3 years with the possibility of renewal.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
933 Ramsay Lake Road
Floor B6
Sudbury,
ON
P3E 6B5
Canada
Comment
Commenting is now closed.
This consultation was open from June 20, 2024
to July 20, 2024
Connect with us
Contact
France Belley-Biswas
Willet Green Miller Ctr Level B6
933 Ramsey Lake Road
Sudbury,
ON
P3E 6B5
Canada
Comments received
Through the registry
0By email
0By mail
0